DOOR take measure :The size of the interior room doors is taken differently if there is a door in place, but different if there is no door in its place.

If there is no door in place, the dimensions between the two walls should be checked especially from the top and bottom points.. Most of the time, the measurements in the upper and lower sections do not exactly match each other, in these cases the narrowest measurement is taken into account.. When checking the wall thickness, the highest dimension should be taken into account..

The frame of the doors in place means an area of ​​9 cm, 4.5 cm on the right and 4.5 on the left..

fitting ; Compress the wedge to center the merging Wall Opening the Door Frame Parts, Try plugging the door hinges to the door, slot in the chassis between the door 3-4 mm. fill the frame with polyurethane mounting foam by compressing the tension strips so that there is space. minimum for the foam to harden. 1-2 The play clock door without waiting, After cleaning the excess foam by cutting the lock – The structure of the mounting arm, Fasten door jamb to cut in appropriate sizes or mounting studs with the MAS. the tensioning rail 24 Do not move the hour onsite. If you can follow that will be written above the door ready to use.