lacquered-door-model

WHAT ARE THE LAKE AND MEBRAN DOOR STANDARDS?

Membrane door and Lacquer door dimensions have certain standards. As TORUN DOOR, we produce specially sized lacquered doors or PVC membrane interior room doors.. In addition, we keep the best-selling models in stock in the most used sizes.. Thus, we are able to respond to emergency door needs.. These most used interior room door sizes are called standard door sizes..
Room doors are generally light doors as the interior doors are paper inside, with honeycomb-filled doors.. The fact that they are light doors means that they are not durable.. Door surface is also light and light.. This is the door surface used on American doors. While two hinges are generally used for light doors, we also Led KAPI as they are heavier than other doors for lacquer or pvc membrane doors we produce 3 we use hinges.

The correct determination of the opening direction in interior room doors or steel doors will make your job much easier in the future.. Lacquer door that we, as TORUN DOOR, is the manufacturer of, We will inform you about how to determine the opening direction of pvc membrane doors and steel doors..

Correct opening direction on exterior doors and steel doors provides convenience when you move or take home, while the correct position of the inner pvc membrane room doors allows you to make use of the space in the house..

KAPI CANADADOOR CASE INCLUDEDGROUND SPACE
ROOM DOOR80CM86CM90CM
WC DOOR70CM76CM80CM
KAPI cassation10CM 13e opens14cm 18e opens20cm 25e opens

TAKING THE DOOR SIZE: Lacquer door models or membrane interior room doors should be checked by taking measurements from at least two places from the most part of the room.. Sometimes the size taken from the top and bottom may be different due to the lack of symmetry.. It is necessary to apply this when taking the door length, that is height measurement.. In addition, if parquet will be installed in the apartment, it will always be better to finish the parquet flooring before the door installation.. If parquet flooring is planned and the measurement is taken before the parquet, 1cm parquet share from the dimension should be reduced and the door should be produced 1cm smaller.. About taking measurements Led KAPI You can get detailed information by consulting.

Doors that are not properly detected require that the wing of the door is removed and reinstalled after the goods are transported.. Sometimes the door can be damaged by too much force.. For these reasons, it is important to determine the opening directions of the doors correctly..

WHAT IS THE RIGHT DOOR SIZE? SHOULD I LEAVE HOW CM CAP FOR THE DOOR?

When you receive service including assembly, it is taken by us as TORUN DOOR, since we take measurements on site and make custom assembly to the measurement.. General information you need to know only when you are going to buy doors, except assembly.

Measurement standards to be left in PVC membrane doors and lacquer door models, that is, in interior doors

In order for wooden room door models to look more beautiful, they must be separated so that molds are formed in each area.. Thus, doors with moldings on all sides will look more beautiful.. There is no molding on one side, that is, if there is no wall on one side of the door, there will not be a molding area, so its appearance will always be a bit lacking.. Since a newer door always carries the expectation of a more modern and beautiful view, the complete formation of the door sills is important for the view..

ROOM DOOR WIDTH: The width of the room door is 86cm, while the width of the wc and bathroom door is 76cm.. For these, the mounting door space is also left and the room door should be approximately 90cm for 86cm. ; 7680 cm wall space should be left for cm wc and bathroom interior door..

ROOM DOOR LENGTH: In the room and other interior doors, the door length is usually 203cm.. However, we can produce doors up to 210cm upon request.. 203For cm door, usually 205cm wall height is left. In the bathroom door and wc door, sometimes the threshold marble is placed under the door, and sometimes it can be produced lower due to the code difference..

60This issue should be taken into consideration in the first place as the interior room doors with a space less than cm will cause problems in terms of entering and exiting the washing machine..

DOOR WALL THICKNESS: The size here is the size of the wall where the door will be mounted.. Door frames are produced as 10cm -14cm and 20cm. 10Door frame up to 13 cm, 14Door frame with cm is opened to 19cm and door frame with 20cm opens up to 25cm.. Snap sills allow easier door installation. At the same time, it easily removes curvatures and defects in the wall..

DOOR OPEN DIRECTION

How to determine the room door opening direction?

When you stand outside the door, we call it in which direction the door hinges are opening in that direction.. When we look from the outside, if the door hinges are on our right, our door opens to the right.. If it opens to the left, our door opens to the left. This is both interior doors; lacquered doors, applies to both membrane door and exterior steel doors.

Opening your exterior door so that you can reach the hall directly. The sink should be accessible in the easiest way when wc and bathroom doors are opened. It becomes even more important in narrow wc and bathrooms. Yanlış tespit edilmesi durumunda kapı lavabo tarafına açılarak çarpacak tam olarak açılmayacaktır.

On the room doors, easy items should be removed and easy items should be placed.. In addition, when the room door is opened, there should be no belongings behind the door.. Thus, a fully open door will be better for both fitting and using the room..

Led KAPI Lacquered door and membrane door Ikitelli-Istanbul

For your questions and orders WHATSAPP 0506 147 00 70